All of our Bare Dry Suits are custom sized orders to insure PERFECT Fit!.
Call us to place your order 904-270-1747
The Bare XCS2 Tech-Dry, Dry Suit is manufactured with 2mm Hyper-Compressed FULL-STRETCH Neoprene to Minimizes Changes in Buoyancy and Thermal Protection at Depths. Following BARE's Specifications, the Neoprene Manufacturer first produces sheets of Thick 7mm Neoprene. These are then placed in a machine that uses a Combination of Heat, Time and Mechanical Pressure to compress the 7mm sheet all the way down to 2mm thick. Then the Inner and Outer Fabrics are Laminated-to-the-Foam providing Comfort Inside-and-Durability Outside. This Extreme-Compression from 7mm to 2mm gives the material BARE's best option for Stability of Inherent Buoyancy and Thermal Insulation with Varying-Depth, allowing the diver to choose the correct degree of Thermal Efficiency in the Undergarment Option for the specific dive being planned. This Nylon II Neoprene is an Excellent-Choice for Deeper Dives. "DIAMOND-TUFF" Nylon Laminate on the Exterior and a High-Stretch Interior Laminate provide 4-Way Stretch enhancing your Freedom of Movement. Innovation: Newly Advanced NST (No Stitch Technology) process uses the latest Double Heat Tape Technology allowing for "Pin Stripe" Tape to be used, Enhancing-the-Suits Overall Stretch Characteristics. TIZIP Master-Seal Main entry Zipper offers Improved Flexibility over Traditional Brass Zippers and uses a Lower-Profile Design. Inner Fabric is a High Stretch and Very-Smooth Blend of Nylon and Spandex for a "Frictionless" Donning with BARE Thermal Layers. The BARE XCS2 Tech-Dry, Dry Suit has PROTEKT Shoulder, Underarm and Elbow Protection that provide the Next Generation of Abrasion-and-Wear Resistance and offer a High Degree of Stretch for Comfort-and-Freedom of Movement. Suit has a Self-Donning Front Entry with Protective Zipper Cover. A 2mm Nylon/Smooth-Skin Warm Collar with Vented Neck Drain provides an Improved-Seal with the BARE Dry Hood. The Suit has a Si-Tech 360° degree Swivel Inflator Valve (default placement on the center of the chest) and Arm Mounted Exhaust Valve (default valve placement on upper left arm). Inflator comes equipped with a 3/8" Threaded Low Pressure Hose. This Low-Profile design of the Si-Tech Inflation Valve helps Reduces the likelihood of Snagging on Kelp, Seaweed, Fishing Line, etc. The Inflator Valve Rotates to any Point-Desired for Easy-Hose-Connection and Moves-with- the-Diver during the Dive for More-Freedom of Movement. The Inflator Valve is fitted with an Internal Neoprene Baffle and an External Rubber Apron. The Inflation Baffle Deflects the Incoming-Air, providing a More-Comfortable Diver. The Rubber Aprons Protect the Dry Suit from Abrasion by the Inflator Hose, Chafing by the Valve Housings, etc. Inflation Valve is made from Durable Plastic with a Chrome-Plated Brass Inlet Fitting. Inflation is Easily-Preformed with a Center Recessed Push-Button. The Recessed Design prevents Accidental Inflation, even when Squeezing-Through a Narrow-Passage. The Inflator Valve is equipped with an Inlet-Nipple Protective Cover. The Suit comes Standards with Oval Cuff Rings, Bottleneck Latex Neck, Silicone Wrist Seals and Default Compression-Resistant Soft Boot Socks. Pre-Installed Suspender Tabs are ready to Accept (Optional see SKU: BREDSS) Suspenders. To protect this High-Wear Area Suit has K-PADz (Kevlar) Knee Protection. For Night and Low-Light Conditions Suit is equipped with Premium Banging-and-Reflective Patches. Suit is Black in Color, comes with Talc Bag for Latex and Silicone Seals and Storage Carry Bag with Manual.
Dry Suit, Hose & Lifetime warranty
Bare size chart
NOTE: WE CAN SPECIAL ORDER ANY SIZE SHOWN FOR YOU!
.jpg)
